If you haven’t read about it before, the term comes from the band Van Halen, who demanded that there were no brown M&M’s backstage. People thought it was just a crazy rock star thing, but David Lee Roth later explained that it had a purpose:

Van Halen was the first band to take huge productions into tertiary, third-level markets. We’d pull up with nine 18-wheeler trucks, full of gear, where the standard was three trucks, max. And there were many, many technical errors—whether it was the girders couldn’t support the weight, or the flooring would sink in, or the doors weren’t big enough to move the gear through.

… So just as a little test, in the technical aspect of the rider, it would say, “Article 148: There will be 15 amperage voltage sockets at 20-foot spaces, evenly, providing 19 amperes … ” This kind of thing. And article number 126, in the middle of nowhere, was, “There will be no brown M&M’s in the backstage area, upon pain of forfeiture of the show, with full compensation.”

So, when I would walk backstage, if I saw a brown M&M in that bowl … well, line-check the entire production. Guaranteed you’re going to arrive at a technical error. They didn’t read the contract. Guaranteed you’d run into a problem. Sometimes it would threaten to just destroy the whole show. Something like, literally, life-threatening.

My Brown M&M atm is AI-generated comments like this (first comment is referencing something like df = ... that they removed from the code, but left the comment, second comment is super useless):

# Assuming df is your DataFrame

# Show the plot
plt.show()

That probably means whoever I got the code from just copy/pasted whatever the LLM spit out, and didn’t actually think about the code at all.

What is a small detail that you pay attention to because it means there’s bigger issues to watch out for?

  • Rhynoplaz@lemmy.world
    link
    fedilink
    arrow-up
    46
    ·
    edit-2
    23 days ago

    The first thing that came to my mind was car repair.

    This one wasn’t one purpose. I went to a shop for an oil change and 10,000 point inspection or whatever they called it. I knew one of my headlight bulbs went out a week before, but when I got the inspection report, it said everything was fine. I went to the shop manager and asked him to confirm that the mechanic had checked everything on the report. I didn’t blame him for the oversight, but he was kind of a dick when I pointed it out and had him do everything again until they found the problem.

    Also, my dad always wrote the date on his air filters when he put them in because mechanics would often keep a dirty one laying around just to show it to customers and tell them that it was their filter and it needed replaced. He always got a kick out of calling them out on that kind of bullshit.

    • PriorityMotif@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      23 days ago

      I always used check the spare tire pressure and note of it was low. Nobody’s going to question your thoroughness if you’re checking the spare tire.

  • kersploosh@sh.itjust.works
    link
    fedilink
    arrow-up
    35
    ·
    23 days ago

    Not me, but an old coworker used a similar trick to see if reviewers were actually reading his documentation. Before sending a large document out for review he would add a sentence to some random paragraph stating, “If you read this, come to my office and I will give you $20.” Surprisingly few people ever came for the money.

  • Captain Aggravated@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    33
    ·
    23 days ago

    Turtle.

    My 11th grade English teacher would hand back essay assignments with grades at the top and no markings throughout. I tended to get high but not perfect grades, but the impetuousness of youth got the better of me. In my next essay, which I wrote normally, I wrote the word “turtle” in the middle of a sentence somewhere in the middle of each main body paragraph. Just somewhere in the middle of a sentence I turtle copy pasted the word “turtle.”

    That paper made a 94. There was no mention of it. I’m pretty sure she just graded on who she liked and I wasn’t a problem.

  • Sequentialsilence@lemmy.world
    link
    fedilink
    arrow-up
    22
    ·
    23 days ago

    I work in the event industry as a production manager, I get to write these things.

    As is typical when you have a large crew there will be dietary restrictions, some of them can be deadly. So before me or any of my crew starts unloading the truck I need to have a cold Dr. Pepper in my hand. If I don’t, we doordash, we do not eat the food provided.

  • Hikermick@lemmy.world
    link
    fedilink
    arrow-up
    22
    ·
    edit-2
    23 days ago

    I use this VH trick at work occasionally for fun just to see if anyone reads my service report. “Your boilers are about to fail in the middle of winter but don’t worry I sprinkled pixie dust on them and did a rain dance”. Never heard from anyone not even my boss. One customer I used to write “Does anyone ever read these? If so call me at (phone number)”. I handed it to the man in charge, he pretended to read it, signed it and handed it back to me. The only one my boss called about was the one I wrote that simply said “I took a shit in the floor drain here”

  • spittingimage@lemmy.world
    link
    fedilink
    arrow-up
    21
    ·
    22 days ago

    This is gonna be controversial.

    When I find out someone is a Christian, I ask them about their favourite part of the sermon on the mount. If they don’t know it, they’re ‘cultural Christians’ who’ve never opened a bible. If they’re familiar with the sermon, it means they do the work. The sermon on the mount is the section of the bible where Jesus explained to people what values they should hold and how they should behave in order to call themselves his followers.

    I’m an ex-Christian and so are a lot of people who just don’t know it yet.

  • Phoonzang@lemmy.world
    link
    fedilink
    arrow-up
    19
    ·
    22 days ago

    In a former job, I developed “software” (I clicked together some LabVIEW…) for custom designed scientific experiments, which many other researchers (mostly PhD students) would use. Wrote detailed SOPs for their usage, because everything was wonky and in constant evolution, and in some circumstances, data generated could be wrong. So I put a toggle switch with some cryptic acronym on the panel which was told to be flipped in the SOP when users reached the part where following instructions was really critical. The toggle switch did nothing but to log time and date and what user was logged in. When discussing weird data later on, first thing I did was to check whether that log existed, and if not heavily scrutinized the data with respect to errors that could be induced by not following the SOP.

  • j4k3@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    arrow-down
    1
    ·
    23 days ago

    I say howdy to gauge people’s initial reaction when I first meet them. Their reaction to the corny and outdated term is telling about their mental picture of the world. It is the only time I use the word.

  • PM_Your_Nudes_Please@lemmy.world
    link
    fedilink
    arrow-up
    16
    ·
    22 days ago

    I work in live production, and have actually encountered the Brown M&M’s clause in real life. It was a small 5 person band. We had the show’s producer sitting backstage, picking brown M&M’s out of the fishbowl for probably 45 minutes.

    They showed up for sound check, and immediately went “holy shit you guys actually pulled out the brown ones? We added that as a joke!” The producer was in earshot, and I got to watch him take psychic damage in realtime.

  • Nfamwap@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    edit-2
    22 days ago

    Part of my job (fibre project engineer) is to oversee the building of fibre optic spine cables. Think of an 864 fibre cable snaking it’s way through town with various drop off nodes for local access networks to be built.

    I also oversee the termination of the cable in the exchange, and the testing of the spine to make sure it’s within loss limits and that the right fibres are going to the right nodes.

    I will often put a minor fault on in the exchange to see if the guys doing the testing pick up on the issue and report it back to me. Maybe a slightly dislodged connector, or fibre 275 crossed with fibre 276, for example.

    Most of the time, the guys doing the testing will pickup on the issue and resolve it report it back to me. If it doesn’t get picked up on, I’ll make sure I keep a closer eye on the build crew.

  • rowinxavier@lemmy.world
    link
    fedilink
    arrow-up
    10
    arrow-down
    3
    ·
    22 days ago

    I don’t have photos of myself on the internet and do not participate in group photos. If I see a photo of myself online I know, for a fact, that the person who posted it does not respect my privacy, therefore they do not respect me. I will not trust them with any information about myself and others and in general will cut them out of my life if at all possible. Because of this I don’t have people who violate boundaries they don’t share, so if I said “Actually, I think I may be a woman” or “I have been thinking about leaving the country” they would not immediately judge or try to prevent my doing so, they would let me be and respect my needs. Also because of this I am much more comfortable working on things with these people to make life better and to invest in their wellbeing.

    • GreenKnight23@lemmy.world
      link
      fedilink
      arrow-up
      10
      ·
      22 days ago

      My kids school used my kids photos in their community outreach pamphlets that went to tens of thousands of homes in the area.

      We have a media policy contract on file with them to not do this. When it was brought up they acted like we were overreacting.

      I told them I had history with a stalker in my past that still tries to reach out and make contact, and they have endangered my children because of their negligence. I asked them if they were ready to open themselves for a lawsuit should anything happen in the future and the Superintenant just sat there quietly with nothing to say.

      IMO people don’t take their privacy seriously enough until someone is hunting them down to rape and kill them.

  • SlopppyEngineer@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    23 days ago

    Everytime with a project when you ask a document that says what has been agreed with the customer and the estimate for a planning and they look at you like a deer in the headlights to then forward a document from the sales guy that just says “we’ll do everything” and a phone book sized map with “a few additional demands from the customer.” Yeah, that project is auditioning for a role as the Hindenburg.

  • Hugin@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    23 days ago

    I used to work in serious sim. Think using game engines for realistic combat stimulation and training by the army. Systems had to interact and had different jobs rts, fps, driving simulator, etc.

    So they each needed a unit database that was unique to that system. They also usually had a two versions a classified database and a less accurate non classified database.

    A quick way to test was there was a unit type that was always set to invulnerable in unclassified databases. So drop one in the sim and drop some artillery on it. If it wasn’t destroyed you were unclassified.

      • Hugin@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        22 days ago

        We should have totally called it a unit test.

        So the area for this was used for both training of soldiers and demos for people without security clearances. So it frequently had to be switched between the two. So you get everything setup and ready.

        As a last test you drop the unit in and blam it. Then you go to each system and check the unit status. If it’s ok you are good to demo to civilians.

        A unit test wouldn’t work because it’s a deployment situation and a lot the software wasn’t under our control. A lot of time it was just making sure the DIS HLA gateway was properly configured and entities remapped.

  • BilboBargains@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    21 days ago

    It’s a good test when working with people that you don’t know, contractors, etc. In the automotive industry we work with a lot of electronic system suppliers and they deliver embedded software in the form of ECU. Software in this form can hide a multitude of horrors so the only way to keep track of it is to make release declarations, implying testing has been carried out. If that’s not present, you can’t trust it.

      • Caveman@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        21 days ago

        Jetbrains vim mode gets pretty close. My current issues with it are that I can’t use the ctrl+o navigation to go back to previous location when using something like “Go to implementation” and import auto import is going to be the thing that’s loaded in to the “.” repeat action.

        I’ve tried basic vim and IDE setup vim but Rider has to many nice things like checking inline SQL strings against a database when programming C# and that sounds like a can of worms to set up. I tried Lunarvim and it was really good but Rider just has a better debug mode experience.

        It may sound weird but I don’t feel like maintaining my vim for couple of hours here just to have all the features of my current IDE. I still use Lunarvim on smaller projects or to edit some text and whatnot but for work I really prefer my IDE and all the bells and whistles that come with it. For example I have Ctrl+. to search for an action “history”+enter shows the git history of the current file. There are tons of these nice things.