Reject tradition. Embrace forever chemicals.
BerlingerHaus uses some kind of artifical stone instead of teflon. I’ve only got a grill pan so far but it’s easier to use and to clean than teflon. Surely wherever you are has something similiar?
it’s so much better than stainless
debatable but i think so
it takes a little maintenance
everything needs maintenance in the sense that you have to clean it. jokes aside, the only maintenance it needs is to burn oil in it if the seasoning got a little damaged for any reason
can’t cook anything tomato based
you can, it’s not great but won’t ruin it
eight coats of oil you have to burn onto it before you can use it
that’s not true, all cast iron pans come pre-seasoned from the factory
you can cook fried eggs and steak
that is true
even after seasoning it everything will still stick to the pan
not really, it’s pretty non-stick
to clean it you gotta heat it up then dry salt scrub then re-season
not really, you only need to do that if the seasoning got damaged
if water ever touches it the entire thing will disintegrate
that’s not true, you’d have to leave it in water for days to get it to rust
things that aren’t mentioned: you gotta use it regularly otherwise it gets sticky; you can use metal tools like knives and spatulas directly in the pan that would demolish any teflon; the seasoning is more resilient than people think, you can even wash it with dish soap; the seasoning actually gets stronger when you fry fatty things in it (grilled cheese, steaks, eggs, sausages); it’s very simple, durable, rustic, old technology, and incredibly cheaper than skillets of a similar quality (excluding cheap teflon pans); you can unrust it in your garage and even weld it back together if it breaks, which is sick as hell.
I’m with you 100%.
I’ll add that I rarely use my cast iron in the kitchen, preferring to use it on camping trips or the grill. Why? The sheer heft of the thing could accidentally cause my glass cooktop some trouble. For those occasions, I reach for my well-seasoned carbon steel pans: much lighter with most of the same non-stick situation as the iron skillet.
I don’t know your glass cooktop, but i’d be shocked if the weight of a cast iron was enough to damage it. Does this mean you also wouldn’t put a cooking pot full of water on it? Mine had no problem, didn’t even get scratched which i was worried it might.
That said i do think cast irons can be too heavy for some people, especially when it’s full
Here’s the thing: I’m a klutz, and do not always watch my hands (damn ADHD). So this whole thread is semi-rational at best. Still, I’m certain that I’m the guy that would drop it one or more inches onto the cooktop by accident. I honestly don’t know how resilient these things are, but I’m not about to find out.
That said, I looked up some numbers for weights and well, it’s really not too different from a full pasta pot. I may just have to work up the courage. Thanks.
Yeah i believe you can break a cast iron, it will snap instead of bend, but i have no idea how hard you’d have to drop it. It also probably would damage the glass
you can unrust it in your garage
You can very easily de-rust cast iron cookware with Ospho which is basically phosphoric acid (Loctite naval jelly available at Lowe’s is the same stuff in gelled form, which is a bit grosser). Obviously you have to rinse it really well afterwards, but it’s a hell of a lot easier than trying to physically remove the rust.
There is nothing wrong with putting cast iron in the dishwasher. I do it all the time.
If the dishwasher strips the seasoning, you seasoned it wrong
In all seriousness my cast iron never looses its seasoning and is the best non stick I have in my house. I refuse to go back to PFSA
People have weird ideas about seasoning. It is literally oil polymerized and bonded to the metal with high heat; but people act like it just rubs off. You can scrape seasoning off, but it’s hard. I need steel wool to do it.
I think these people complaining aren’t really seasoning their pans - just using dirty pans (i.e. the oil hasn’t fully polymerized).
Cast iron is cheap, indestructible, gets better with time, does want some care but nothing outrageous. I do have a good stainless skillet as well, call it the “stick pan”, if you want something to stick and then deglaze, it’s good.
But the cast iron is my joy, my kids joke that I love it more than I love them (it is older than they are) and already argue about who will get it when I die. Have never bought a nonstick pan, they seem unhealthy, and old cast iron is satiny and nonstick. It suits the way I cook, or perhaps the way I cook has been shaped by the pans. I don’t worry about tomatoes or wine sauce but wouldn’t slow cook spaghetti sauce in one, would use stainless or the Le Cruset one for that.
Mostly I think it’s like flannel, not great at the start but improves with use, ends up better than everything else and then stays better for a long time. In the case of cast iron that could be several generations.
Then my fictional grand kids can have my pan that has 5 different layers of seasoning on it with half of them peeling off.
It will last even longer because it’s in my cupboard for 5 years at a time.
Nooo give it to a disapproving hipster dude, so he can sand it and lovingly restore it and judge you!
One of mine got crusty, I put it in the oven and ran it through a self clean cycle, it all burned off and I re-seasoned it, been smooth sailing since. So you could try setting it on fire like that.
I don’t have much more than 250, 270 celcius and that does not seem to cut it.
Find someone with a self clean oven. My current one doesn’t do it either but the ones made to burn the baked on grease to ash get up to 475-480, that is what will burn off the seasoning. Not as hot as a kiln, I have no Idea what that would do.
My biggest gripe with Teflon, after the whole PFAS problem, is that you have to baby it. I never was able to find a plastic spatula that worked well for any application. At worst, some are so darn floppy it’s like trying to flip an fried egg with another fried egg. Not to mention, the leading edge would eventually melt and deform sending plastic shreds everywhere over time.
The things you can do cooking-wise with metal tooling just get you more control and better results. Any pan/pot that lets you do that is going to help your overall cooking experience. Plus, even if you don’t go carbon steel or iron - say, stainless or even glass - de-glazing the pan with some water and heat from the range can make short work of cleaning.
One last point to this rant: your favorite cooking shows are lying to you softly. Your cookware are tools - they’re gonna get fucked up. Used things eventually get scratched, stained, singed, dented, and that’s okay; I promise you they’re not unsanitary because they’re in this state. Those stainless pans with mirror-perfect surfaces, or carbon steel skillets with that pristine golden hue, they’re new; you usually see new product on camera thanks to sponsors and the general optics of the thing. Teflon pans hold out this false promise of pristine cook surfaces that just aren’t realistic. And in practice, even those awful things do not go the distance. So yeah, reject modernity and all that. You’ll be okay.
Why would you use a plastic spatula? I use wood with teflon - doesn’t scratch and isn’t floppy!
Right! I use silicone spatulas because I like the slight bit of flop it has, but there are options besides pan scratching metal and really crappy, pan saving plastic spatulas.
Nah my cast only washes with hot water and small Scraper. If you need soap. We’ll you don’t like actualy don’t. Seasoning? Just cook bacon, dump the grease leave a bit in put it back on the stove for a hot minute or while you put your blt together. Done it’s hunk of metal not much you can do to fuck it up. And if food is sticking to it probably cause you didn’t get the pan hot enough before you put the food in.
I just like how I can use my metal scrapers and spactulas without having to worry about damaging it.
why use a forever pan when you can have forever chemicals?
I use a wok and I wish I could use it for everything. I love that little damn thing to bits. I have only seasoned it twice (removed the previous one due to rust) and it can fry an egg fine.
It handles soap, tomatoes and other acidic foods fine as well. Didn’t use any fancy oil, just avocado oil.
My mom’s 300$ tephlon pans don’t even last more than 8 months without getting nicks. My Lil fella is 15 years old.
They want to brainwash into using expensive, disposable, products.
FYI it’s Teflon.
I’m gobsmacked at the idea of playing this much for anything Teflon
I’m honestly surprised it took this long before Teflon and PFAS in general became a more public issue.
Especially after project farm showed how easy it is to scratch the coating material. I think only like 2 pans actually held up somewhat in hardness.
Not objective by any measure, but I don’t think ingesting dissolved iron is as bad as dissolved Teflon.
Some would even say that ingesting dissolved iron is required for your health.
I bought like a $30 one at the grocery store a few years ago and it’s still going strong. If I forget to use it for a long time it’ll get a patina of rust, but it scrapes right off. I only seasoned it once when I got it with beef tallow.
Honestly if I threw it away today and bought a new one it still would have been cheaper than buying a Teflon pan for like triple the price and having it only last maybe a year before it gets completely ruined, and you get those forever chemicals in your body as an added bonus.
It’s not like it’s some huge investment, just give it a try and see if it works for you. Buy a cheap one at a big box store, season it with oil or fat, and don’t put it in the dishwasher just hand rinse it with lye-free dish soap and a soft sponge. Maybe that’s too much work for you and you prefer your nonstick or stainless, that’s fine too, good quality stainless can last a lifetime if treated properly and ceramic nonstick pans are getting better and cheaper all the time and pretty much outcompeting PFA-based products because people are becoming more aware of how shitty they actually are.
Yeah, but one hit with this baby and you’ll send any ghost straight into the afterlife.
In the late 90’s I saw someone catch a cast iron pan to the head. I don’t recommend it.
I’ve had one for roughly 15 years and use it almost every day. I most often use it as a baking pan or for grilling things. Not much sticks to it and what does is easily scrubbed off. I don’t season it in any meticulous way, just put a coat of cooking oil on and toss it in the oven every few months. I don’t cook acidic things in it - that is the rare time I use the stainless. I definitely understand why some don’t like the weight but I’m used to it.
Really? I’ve never had luck frying eggs on a cast iron pan, they always seem to get mangled because they stick inconsistently. I guess I could dump a ton of oil on it? That seems… excessive.
You need to start the pan hotter. They only stick for me if I cook them without preheating the pan.
Perhaps, but I’m used to cooking on stainless steel, so I’m guessing it’s hot enough? But I’ll certainly try again, I like the idea of cast iron, just haven’t had a good experience so far.
My gf got me a cast iron pan. I despise it. It’s so much work compared to my other pans and I don’t see any benefits. I only bring it out if she’s watching me cook over my shoulder, so now I cook I tell her to relax on the sofa with some streaming or a book.
So a few tips for cast iron if you want to know why people like it. It does take a bit of practice because cooking with it feels different and wrong when you’re used to other pans. But once you know how to work it it legitimately does cook better and clean easier while being practically indestructable. I used to think the same as you until I made myself learn how to use it and now I will never go back.
-
Let it properly heat up before you put anything in it or it will stick. Flick a drop of water at it before cooking and if the water beads up then it is ready. Unlike other pans, cast iron has a lot of mass and takes a bit to warm up. But that also comes with the advantage of being able to maintain an even and stable temp across the pan. Cast iron feels like cooking on induction no mater what type of range you have.
-
When in doubt use more oil, butter, or grease.
-
Use metal tools. This alone is one of the big advantages of cast iron. Unlike other pans you don’t need to baby cast iron. I use a steel grill spatula on mine.
-
When you’re done cooking just wipe it out with a paper towel while it is still hot. Unlike other pans you actually want to leave a thin layer of oil or grease on cast iron. You only need to get the food out of it which usually only requires a quick wipe. If you cooked something saucy then just wash it like you would any other pan (except don’t leave it to soak), just be sure to completely dry it on the stove afterwords and apply a thin layer of oil to it.
-
Use it at least every other week. The more you use it just for frying thing the more nonstick it gets as the layer of seasoning builds up. Letting cast iron sit is how it gets sticky and nasty. If you are going to store it long term then wash it with soap, dry it on the stove, and coat it in a thin layer of flaxseed oil because that stuff stays good practically forever.
-
