Additional advice: Clean the dishwasher filter regularly.
the what?
You may want gloves for this one…
Not all of them have one, if yours does and you’re just learning about it, I’m very sorry. But you have a truly terrible job ahead of you.
Assuming you don’t have a manual to read: First, start with a freshly -emptied clean dishwasher, no spills in the bottom. Wear rubber gloves if you’re easily grossed out. Pull out the bottom drawer. Look in the bottom, you see anything that looks like you could turn it 🛞, with maybe a couple arrows ▶️ ◀️ to line up? Lefty-loosey it, pull it out and take it to the sink, along with any screenlike thingamabobs that come out with it. Run warm water and use hands, sink brush, or scrunge to gently remove all the gunk. You don’t have to abuse it, you want it to last the life of the machine. Also feel in the hole, removing any gunk left behind. If the filter pieces come apart easily, do that, but put them back as they were before reinserting into the machine. Fit it back into the hole and righty-tighty to match up the arrows. Don’t over-tighten! Go rinse out your sink, dry your hands, and set a monthly notification on your phone. It’s much less gross if you do it monthly.
oh that doesn’t sound as bad as i was expecting. thank you for the explanation. i believe i have found the wheel and i will give it a go this coming weekend after i secure some gloves and prepare myself mentally for what’s to come. the reminder thing sounds like a good idea, i have a poor habit of letting some of these home maintenance things slip my mind and the new year might be a good excuse to try to do those things more routinely. we’ll see how it goes.
Even if you find a lot of gunk, remember it’s had hot soapy water washing through it every time you ran the dishwasher, killing a lot of the germs at least.
Oh no
And the HVAC and cabin air, huge laundry list of them it seems
This guy clearly doesn’t subscribe to technology connections
…or has much common sense—what did he think that thing on the door was all about.
Wait till this guy discovers he should probably use rinse aid and salt too
Edit: oh…and he’s definitely never cleaned the filter
This guy clearly doesn’t subscribe to technology connections
Guys, guys…guys…
LET’S TALK ABOUT HEAT PUMPS!!! :D
I have a friend who does this. I tried explaining to her that she’s doing it wrong. She told me I’m wrong and she won’t discuss it further. I don’t get some people.
Most people hate being wrong, or corrected. They seem to see it as an affront to their very existence, and will often fight back tooth and nail when confronted with any evidence that the things they believe about the world might not be 100% correct.
Source: Any substantial comment thread on any social media platform, ever.
People who are readily willing to admit they’re wrong and learn why, and on the flip side be able to correct others in an educational/non-condescending way, are the best people.
I love those people.
She might be right, it depends on the type of the dishwasher.
Maybe she thinks it’s just vibes.
Just RTFM?
I read somewhere that around ⅓ of people (at least in my country) are effectively illiterate. They can read but they can’t really understand what they read. They can’t solve logical tasks and would fail for example to take medication according to written instruction. It does explain a lot.
Even of the literate people, far too few bother reading instructions. People who can read and interpret law texts, but they still click away a pop-up unread when setting up a new phone for example. The only people who I’ve only ever had a good experience with when it came to diligently reading and following instructions + escalating the problem when the instructions were unclear, were professional accountants.
This is the level of understanding I’d expect from someone who thinks vibes affect modern appliances.
Wait until he discovers that you can clean the filters at the bottom and get things even cleaner.
Mix both worlds. Like I have learned from a very investigative YT video. He tested and measured dishwashing in many different ways, and came to the result that a) tablet in that place in the door is the thing to do, but also b) a bit of dishwasher powder into the little compartment right next to it under the flap. This is for the first cleaning stage, and since we use this trick, our dishwasher runtime (which is dynamically depending on cleanlyness of the dishes) has gone down by about 20 minutes.
Are you referring to Technology Connections video on dish washers? This video
If so, it’s a bad summary. The video advocates against tablets
because they don’t do prewash, if you’re putting a tablet in main wash and powder in prewash, should be fine.
Nope, the one I’ve seen is way older than just six months.
How does a machine know whether the dishes in it are clean?
Ask the machine, I don’t know, but it works.
My mom told me an embarrassing story about how my dad once used regular old dish soap apparently it didnt end well and suds got everywhere. At least this person knew to use the tablets.
I can only imagine what his dryer vent like.
Vent?
My previous diswasher had the compartment just for powdered detergent. Tablets were supposed to go directly into the dishwasher, per the manual. So the approach works with some machines.
And next we’ll tell you what the little hatch labeled “rinse aid” is for.
In other news, major manufacturers are starting to ship appliances now without including any printed instructions. I can see that it’s just as well; it’s clear that nobody would read them anyway.
I do. And more importantly, I judge others by whether they do or not. Any manufacturer who doesn’t ship a manual will get permabanned by me.
Well, no GE or Whirlpool for you anymore, then.
Meanwhile, here I am still lamenting that they no longer come with circuit diagrams.
Surprisingly, a lot of them do. Check behind the toe kick or in a lot of machines, inside the control panel cover.
Really cheap appliances that are still entirely electromechanical might come with complete schematics, but I’ve yet to encounter an electronic one that does (where “complete” means “including the details of the PCB, not just treating it as a black-box component”).
You’ll never find a schematic of the PCB because the manufacturer not only treats it as a black box, but it will also be incessantly revised mid-production run by their OEM’s to cut costs every time a component comes out that’s 2 cents cheaper.
I understand that, but that doesn’t mean I have to like it.
yes, please, stick a QR code on it which leads to the manual in a PDF format. Why do I get a book in 20 languages instead? What century is this?
It’s a shame that the dishwasher the landlord installed has a shitty soap compartment that sometimes failed to open during the wash. When I tried to take it apart to see what the issue was, I couldn’t get it back in. So now I just chuck the puck in.
My parents were really adamant about not leaving any food on plates, so it really doesn’t make a difference to me.
Same. If I use the compartment it has like a 50% success rate. So I Chuck it in and it works well enough
Its not that uncommon that some people don’t know how to use every day stuff correct and use them wrong. One thing I’ve noticed that a lot of people use wrong are thermostatic radiator valves. Its not a simple valve and the numbers don’t indicate on how far open the valve is, its a temperature setting. I’ve often told people to not set it to 5 and rather set the target temperature and 3 is about 20°C, so room temperature. At work all engineers don’t get it and we stupid little IT guys with a smaller degree get it right.
To be fair, they aren’t that accurate. Its pure mechanical and the sensing happens in the thermostat but when it closes the valve, the radiator is still full of hot water. You need to find the correct setting for your room and so on. With electric ones, you can fiddle with the settings, to be more accurate.
You’d be surprised at how many people are tech-illiterate & end up blaming technology
I can’t wait until they discover rinse aid. If your dishes still look dirty no matter how many cycles you run the machine for, then you probably should have refilled the dispenser ages ago.
