But they do need special maintenance, compared to Teflon pans or ceramic pans, they are the most finicky and hard to work with.
There are a lot of things people have done for centuries. Being old doesn’t make something superior.
The problem with the people who prostletyze cast iron, is they usually assume that everyone cooks like them, but the reality is that cast iron is generally a pain in the ass. I mean just the fact that you need to cover the entire pan in oil Every time you put it away should be enough of an indicator.
You don’t and it isn’t. I cook exclusively on cast iron, and I oil it only before I put some food that requires oil. I use hot water and a paper towel to wipe it clean. Been using it for years, way less scrubbing than stainless 90 percent of the time.
But I use it exclusively and daily, so ymmv.
If you treat cast iron with the same care that a non stick pan requires with just a little bit of oil it will be better over time. With those same instructions an average non-stick pan, used daily will degrade in 5 to 10 years. Iron is heavy and inconvenient, but carbon steel pans run 90% of the Michelin rates kitchens you will find. Cast iron can do much of the same work at home and, in the US is much easier to find. A 10 inch Lodge cast iron pan can be found in any X-mart. A 10 inch Matfer Bourgeat is a bit pricier and harder to source. Good luck with pan fried fish in a non stick pan after a month. Same with cooking 40 burgers or omelets a day for a month. 2 of the items I mentioned could do that easily. The average non-stick pan could not.
Oh hell no. Nonstick pans have to be babied - plastic spatulas, gentle sponges, and they get worse with time. Cast iron you almost cannot destroy, and gets better and better with use. Scrub away with chainmail, scrape with a metal spatula, it doesn’t care. Too hot? Doesn’t care.
no. Teflon pans are just the worst. silicone utensils only and never turn the burner over half or your budgie dies. BTW your theory about oil coating is idiocy.
But they do need special maintenance, compared to Teflon pans or ceramic pans, they are the most finicky and hard to work with.
There are a lot of things people have done for centuries. Being old doesn’t make something superior.
The problem with the people who prostletyze cast iron, is they usually assume that everyone cooks like them, but the reality is that cast iron is generally a pain in the ass. I mean just the fact that you need to cover the entire pan in oil Every time you put it away should be enough of an indicator.
You don’t and it isn’t. I cook exclusively on cast iron, and I oil it only before I put some food that requires oil. I use hot water and a paper towel to wipe it clean. Been using it for years, way less scrubbing than stainless 90 percent of the time.
But I use it exclusively and daily, so ymmv.
If you treat cast iron with the same care that a non stick pan requires with just a little bit of oil it will be better over time. With those same instructions an average non-stick pan, used daily will degrade in 5 to 10 years. Iron is heavy and inconvenient, but carbon steel pans run 90% of the Michelin rates kitchens you will find. Cast iron can do much of the same work at home and, in the US is much easier to find. A 10 inch Lodge cast iron pan can be found in any X-mart. A 10 inch Matfer Bourgeat is a bit pricier and harder to source. Good luck with pan fried fish in a non stick pan after a month. Same with cooking 40 burgers or omelets a day for a month. 2 of the items I mentioned could do that easily. The average non-stick pan could not.
Oh hell no. Nonstick pans have to be babied - plastic spatulas, gentle sponges, and they get worse with time. Cast iron you almost cannot destroy, and gets better and better with use. Scrub away with chainmail, scrape with a metal spatula, it doesn’t care. Too hot? Doesn’t care.
no. Teflon pans are just the worst. silicone utensils only and never turn the burner over half or your budgie dies. BTW your theory about oil coating is idiocy.
Lol so mad