Selfhosters what is the power draw of your entire setup? And have you done anything special to manage it you’d like to share?
Including all network equipment I use around 110kWh of good ol’ 120V 60Hz USA juice per month. Averaging about 215 watts of power draw for my systems. Nothing amazing, but I like to think that it’s a conservative setup for everything I accomplish with it. I’m paying around $25 a month for my setup. None of that includes my work PC or personal PC, just hosting infrastructure.
Other than trying to make sure all power states are available on my server I haven’t done a lot of power conservation.
I’m curious what you all have.
You must log in or # to comment.
If btop is to be believed my server pulls a tiny 1.5W on idle. Given everyone else’s numbers I’m wondering if that’s true of btop is confused. It’s an old optiplex 3050.
Regardless my main rig which is regularly running expensive simulations is often ~200W so my server and home labbing is a rounding error
90w here, so 65kwh/mo. Tinyminimicro server. Three pi (5, 4, 3B), fiber gateway, Mikrotik router, switch and two APs. Plus power gear (managed PDU and UPS).
i3-4160 running Proxmox (OPNSense VM and a couple of containers) with 3 spinny drives and no GPU, TP-Link 8x GbE switch, ASUS AX1800 as a Wifi AP, ISP’s own manky cable modem, plus a UPS eats about 66-72 watts at the wall socket. If I install a passively cooled GT-710 for transcoding, it adds 10-15 watts at idle.
Just checked my ups. Looks like I’m currently drawing 125W. That’s a NAS, 3 laptops, router, modem, AP, bookshelf pc, and switch.
Around 300wh.
- router
- sw with 4 poe cams
- 2 minipcs as servers
- pc used as nas with truenas
My network and server setup eat about 200 W, split right down the middle. I have plans to cut the network consumption by replacing the PoE switch, so that I can use the savings to add another server.
So it’ll still be about 200 W, but more useful.
