EvolvedTurtle@lemmy.world to 3DPrinting@lemmy.worldEnglish · 1 month agoHey can someone help with print quality this looks really stingy and sloppylemmy.worldimagemessage-square17fedilinkarrow-up146arrow-down12file-text
arrow-up144arrow-down1imageHey can someone help with print quality this looks really stingy and sloppylemmy.worldEvolvedTurtle@lemmy.world to 3DPrinting@lemmy.worldEnglish · 1 month agomessage-square17fedilinkfile-text
minus-squareEvolvedTurtle@lemmy.worldOPlinkfedilinkEnglisharrow-up5·1 month agoOh I didn’t even consider this I’ma try this first This filament has been sitting out for a while so this seems very possible
minus-squareSkyezOpen@lemmy.worldlinkfedilinkEnglisharrow-up2·1 month agoToss it in a box with dessicant packs for a few days. If it’s not flexible and breaks easily, it’s too moist.
minus-squareHootinNHollerin@lemmy.worldlinkfedilinkEnglisharrow-up1·1 month agoCan look up tables of temperatures and times for using an oven to dry various filaments. Putting in sealed container with desiccant could work but will take much longer
Oh I didn’t even consider this I’ma try this first
This filament has been sitting out for a while so this seems very possible
Toss it in a box with dessicant packs for a few days. If it’s not flexible and breaks easily, it’s too moist.
Can look up tables of temperatures and times for using an oven to dry various filaments. Putting in sealed container with desiccant could work but will take much longer